Here are the Gerber files

Here are the HCS_C Gerber files for HCS_C Main board and the Combo board, You

can view these with any Gerber viewer. You may use these files

for any non-commercial purpose, you may modify them for your own use,

but you must keep my copyright notice.

WARNING: CHECK THESE GERBER FILES WITH A GOOD GERBER VIEWER!!

WHILE I'VE DONE MY BEST TO POST CORRECT INFORMATION,

I CANNOT ASSUME ANY RESPONSIBILITY IF YOU MAKE PC BOARDS AND

THEY ARE MANGLED OR MISLABELLED! BUILD AT YOUR OWN RISK!

A.04 HCS_C MAIN BOARD (NEWEST VERSION, 2/15/2007)

Easyedit PCB layout: HCS_C_04.PCB

hcs_c_04_drill_file

hcs_c_04 top_layer

hcs_c_04 bottom_layer

EXTENDED.APT (aperature to drill file)

EEK, APCircuits (or any other PCB vendor) will require a tool file.

I forgot this file, this is just a list of the tool numbers T02,T03,etc

with the corresponding tool file. You can use the HCS_C_04.RCK for this

purpose.

VERSION A.01 HCS_C COMBO CARD AND ADC/DAC CARDS

Easyedit PCB layout: HCS_SADC.PCB

hcs_c_sadc_drill_file

hcs_c_sadc_top_layer

hcs_c_sadc_bottom_layer

HCS_SADC.RCK (aperature to drill file)

EEK, APCircuits (or any other PCB vendor) will require a tool file.

I forgot this file, this is just a list of the tool numbers T02,T03,etc

with the corresponding tool file. You can use the HCS_C.RCK for this

purpose.

OLDER VERSION A.03 HCS_C MAIN BOARD

Easyedit PCB layout: HCS_C_03.PCB

hcs_c text drill file

hcs_c_top_layer

hcs_c_bottom_layer

EXTENDED.APT (aperature to drill file)

EEK, APCircuits (or any other PCB vendor) will require a tool file.

I forgot this file, this is just a list of the tool numbers T02,T03,etc

with the corresponding tool file. You can use the HCS_C.RCK for this

purpose.

Or you can create a text file hcs_c.etl, it looks like this:

ROUND50 T05 35
ROUND62 T03 31
ROUND70 T04 42
ROUND85 T04 42
ROUND100 T04 42
VIA50 T02 28

In the APCircuits order form, you specify the files as follows:

(Different vendors will have different formats)

GERBER TOP LAYER FILE NAME ;hcs_c.gtl
GERBER BOTTOM LAYER FILE NAME ;hcs_c.gbl
GERBER TOP SOLDER MASK FILE NAME ;
GERBER BOTTOM SOLDER MASK FILE NAME ;
GERBER TOP COMPONENT MASK FILE NAME ;
GERBER BOTTOM COMP MASK FILE NAME ;
GERBER APERTURE TABLE FILE NAME ;extended.apt
ASCII NC DRILL FILE NAME ;hcs_c.txt
NC DRILL TOOL SIZE FILE NAME ;hcs_c.etl
SPECIAL INSTRUCTIONS FILE NAME ;readme.txt

Here's the layout file, this can be viewed and edited with Protel EasyEdit

hcs_c.pcb. THIS IS VERSION A.02, which has the known bug fixes from

the original A.01.

You are free to make your own custom edits, but you *must* keep

my copyright notice on all revisions. In no circumstances are you permitted to

modify or use any of these files for commercial or financial gain.

You'll need to replace the easystd.lib file because I added a bunch of SMT

components (Save away your easystd.lib file first, or you may lose any of your

custom parts!!!)